If you own a Peloton treadmill, you may eventually need to adjust the tread belt to ensure it runs smoothly and remains in good working condition.
The tread belt can become loose or misaligned over time, which can cause it to slip or make noise during use. Adjusting the tread belt on your Peloton treadmill is a straightforward process that can be done in just a few simple steps.
In this article, we will walk you through how to adjust the Peloton tread belt so you can continue to get the most out of your treadmill workouts.
You Might Also like to Read: How to Disassemble a (New or Old) Peloton Treadmill?
Understanding the Peloton Tread Belt
Before you begin adjusting the tread belt, it’s important to understand the different components of the Peloton treadmill.
The tread belt is part of the treadmill that you walk or run on, and it is driven by the motor. The tension of the belt is controlled by two screws located at the back of the treadmill.
Adjusting these screws will increase or decrease the tension on the belt, which can help to align it and prevent slipping.
Tools You Will Need
To adjust the tread belt on your Peloton treadmill, you will need a few basic tools:
- Allen wrench (included with your treadmill)
- Phillips head screwdriver
- Flathead screwdriver
Steps to Adjust the Peloton Tread Belt
Follow these steps to adjust the tread belt on your Peloton treadmill:
Step 1: Turn Off the Treadmill
Before you begin adjusting the tread belt, turn off the treadmill and unplug it from the wall. This will ensure your safety and prevent any damage to the treadmill.
We barely discussed: How To Turn Off Peloton Treadmill?
Step 2: Locate the Adjustment Screws
The adjustment screws for the tread belt are located at the back of the treadmill. There are two screws, one on each side of the treadmill.
Step 3: Loosen the Rear Roller Bolts
Use the Allen wrench to loosen the rear roller bolts. There are two bolts, one on each side of the treadmill. Turn the bolts counterclockwise to loosen them.
Step 4: Adjust the Tread Belt
Use the Phillips head screwdriver to turn the adjustment screws counterclockwise to loosen the tread belt. If the belt is too loose, turn the screws clockwise to tighten the belt. Make sure to adjust both sides of the treadmill evenly to keep the belt centered.
Step 5: Test the Tread Belt
After you’ve adjusted the tread belt, test it by walking on the treadmill. If the belt still feels loose or slips, you may need to adjust it further. Repeat steps 3 and 4 until the belt feels tight and runs smoothly.
Step 6: Tighten the Rear Roller Bolts
Once you’ve adjusted the tread belt to your liking, use the Allen wrench to tighten the rear roller bolts. Turn the bolts clockwise to tighten them.
Step 7: Plug in the Treadmill and Test Again
After you’ve tightened the rear roller bolts, plug in the treadmill and test the tread belt again to ensure it runs smoothly and stays aligned.
Tips for Maintaining Your Peloton Treadmill
To keep your Peloton treadmill running smoothly, it’s important to perform regular maintenance. Here are a few tips to help you keep your treadmill in good condition:
- Wipe down the treadmill after each use to remove any sweat or dirt.
- Lubricate the tread belt every few months to keep it running smoothly.
- Check the tension of the tread belt regularly and adjust it as needed.
- Inspect the treadmill for any signs of wear and tear, such as frayed cords or loose screws.
Conclusion
Adjusting the tread belt on your Peloton treadmill is an easy process that can help to ensure your treadmill runs smoothly and remains in good working condition. By following the steps outlined in this article, you can easily adjust the tread belt on your Peloton treadmill and continue to enjoy your workouts without any issues.
Remember to always turn off and unplug your treadmill before performing any maintenance, and to perform regular checks and maintenance to keep your treadmill in good working condition.
Thanks For Visiting!
Related Articles:
